JELN Imprägnierung Metall-Imprägnierungen, Metal Impregnation nano-seal

Application Areas

Our products offer solutions for a great deal of problems encountered in daily
industrial practice. Besides the six main areas of application Nano-Seal products
provide an almost unlimited number of applicatons as impregnant or sealant.
We are pleased to advise you. Please, contact us.

 

1. Product reommendation: Castings

Product selection is primarily based on the thermal resistance:

Nano-Seal 120:

Up to 120°C continuous load; 220°C short term

Nano-Seal 200:

Up to 200°C continuous load

Nano-Seal 500:

Up to 500°C continuous load

Nano-Seal 180 W:

Up to 180°C continuous load; Nano-Seal 180 W ist water-borne. Consequently, it is almost odour-free and all potential hazards caused by solvents are avoided.

Larger pores and higher leakage flow require the X-version, available as Nano-Seal 120 X. Nano-Seal 120 G and Nano-Seal 120 GX only contain polymers which are approved for the contact with potable water.

2. Product recommendation: Thermal spraying

Because of the fineness of the pores impregnation of thermally sprayed layers requires materials with a very good penetration ability:

Nano-Seal 120:

Up to 120°C continuous load; 220°C short term

Nano-Seal 190 K:

Up to 190°C continuous load; excellent protection against corrosion, aggressive chemicals and many solvents.

Nano-Seal 500:

Up to 500°C continuous load; best protection against corrosion and aggressive chemiclas (after annealing).

3. Product recommendation: Automotive parts

Product selection is primarily based on the thermal resistance:

Nano-Seal 120:

Up to 120°C continuous load; 220°C short term

Nano-Seal 200:

Up to 200°C continuous load

Nano-Seal 500:

Up to 500°C continuous load

Nano-Seal 180 W:

Up to 180°C continuous load; Nano-Seal 180 W is water-borne. Consequently, it is almost odour-free and all potential hazards caused by solvents are avoided.

Larger pores and higher leakage flow require the X-version, available as Nano-Seal 120 X.

4. Product recommendation: Welding

Product selection is primarily based on the thermal resistance:

Nano-Seal 120:

Up to 120°C continuous load; 220°C short term

Nano-Seal 200:

Up to 200°C continuous load

Nano-Seal 500:

Up to 500°C continuous load

Nano-Seal 180 W:

Up to 180°C continuous load; Nano-Seal 180 W is water-borne. Consequently, it is almost odour-free and all potential hazards caused by solvents are avoided.

Larger pores and higher leakage flow require the X-version, available as Nano-Seal 120 X. If the part to be impregnated is subjectof chemical attack Nano-Seal 190 K or
Nano-Seal 500
have to be used. (Both grades can only be used for small pores.)

5. Product recommendation: Mechanical Engineering

There is a great variety of applications ranging from impregnation of castings which became porous after machining and the impregnation of welding seams to the protection of machinery parts against corrosion and chemical attack (Nano-Seal 190 K and Nano-Seal 500) - we always offer an optimal solution to your individual problem in when it comes to metal impregnation.

6. Product recommendation: Rapid Prototyping Models

Porous structures canbe sealed and reinforced by impregnation. Reliable answers are Nano-Seal 120 for smaller pores and Nano-Seal 120 X for larger pores. If a partital solution of the model might occur we recommend Nano-Seal 180 W. This product is water-borne thus avoiding any hazards caused by solvents. Nano-Seal 180 W contains nanoparticles and special additives which ensure even wetting of critical materials as plastics.

 

JELN Imprägnierung GmbH, Bleichgrabenstr. 42, D-41063 Mönchengladbach, Tel.: +49 (0)2161 898857, Fax: +49 (0)2161 898847, eMail: info@jeln.de
Deutsch English Viendra bientôt